Carton

Specification --
Quality Standards The appearance, dimension, material and thickness should comply with relevant requirements
Remark Should provide printing license or packaging and printing license

Quality standards of carton

[Material]
C corrugated material for freeze-dried vaccine carton. C corrugated material for freeze-dried vaccine incubator and carton. AB corrugated material for vaccine partner carton(100ml) ,  BC corrugated material for vaccine partner carton(30ml) . B corrugated material for 3G freeze-dried vaccine carton, BC corrugated material for vaccine partner carton.

[Size]
Freeze-dried vaccine carton: 449*380*330 mm
Vaccine partner carton:(30ml)340*334*235mm
Vaccine partner carton:(100ml)505*255*219mm
Freeze-dried vaccine incubator and carton : 390*242*315mm

[font]
FZDHTK—GBK.

[Appearance]
The box should be upright and foursquare, there should be no visible signs of damage and trains, the width of crack on the surface of notch should not exceed 8mm; the joint of carton should be glued with high-strength adhesives. The indentation line of the double corrugate carton should be in the middle with a width no more than 17mm, no cracks, break lines or inconsistent fonts, there should not be additional indentation lines on the wall; after 270°opening and closing of the roll cover for more than three times, surface layer and the inner layer shall not have cracks.

[Thickness of wall]
No lower than 6mm.
 

Contact EBVAC